Quote:
Originally Posted by n00b17
So I have a 2011 E90 with xenon lamps and AEs
I wanted to increase the AE brightness, and I read/was told that I would have to code via nettodat to achieve that.
I got the nettodat.trc for my NFRM module using the NCS-Expert. Then in NCS Dummy the hex values for PWM_SL_1_FKT_BL_TFL & PWM_SL_1_FKT_SL_TFL were set to custom value 0C,2C and create the nettodat.man file (A compare shows the change correctly)
Then back to NCS-Expert, coapiCodeSgByNettoData as the basic function (supplying nettodat.man as the value for the Nettodatenliste parameter)
The jobname was kept as SG_CODIEREN while executing the job, which completed successfully.
However, when I read back the NFRM module to confirm the changes, the nettodat.trc file shows the old values.
What could I be doing wrong ??
I've used different NCS Expert profiles and the result is the same.
|
Make sure you don't do "Process Job" after you code by NETTODAT. I was trying this yesterday and executing the job reverts the changes