Did some investigation into the rubbing in front. Looks to be coming from three different areas:
- Where bumper mounts to the fender. I used a Dremel and trimmed it back a bit
- The actual fender. There is evidence of slight rubbing, likely need to get this rolled.
- The plastic piece of the bumper. I also trimmed this back.
After trimming back areas 1 and 3, and also using heat gun and pushing the fender liner out I'm only getting slight rubbing on front right with big dips. Adding camber this week and should be pretty solid after that. Will roll all four fenders if camber doesn't 100% solve.
