Quote:
Originally Posted by GnomeChild
Now, if you’ve been following this thread since the beginning or read it all and are amongths those assholes like me who want to do this install as cleanly and as OEM as humanly possible, I have finally tracked down the BMW Part Number for the pin connector that plugs into the Rear Plug wiring. It was mentioned earlier in the thread but we were only able to produce the AMP Part#
Black 2-Pin terminal connector [Female] - 61 13 1 378 106
Circular Pin Contact [Male] (2.5) - 61 13 1 376 191 (x2)
Black Plug Connection Bracket - 61 13 1 378 908
Fiberglass Mat Wrap - 61 13 6 920 760
|
All these parts for the wire harness are now suddenly available right this minute from ECSTuning and a few other webstores but the BMW dealerships were telling me it either no longer exists or have to be ordered from Germany. Strange.
Prices are good but I'm not sure I would pay $8 for cloth wrapping tape
I have a 2011 and no front ashtray but when I replaced my console CIC trim it did looked like there was some sort of ground/power (brown/red) pre wiring tucked away under where the ashtray would be.