Quote:
Originally Posted by Snyperx
Wish I had this guide last night. I had a hell of a time with the bolt under the manifold. I was going to take the oil pressure switch out, but opted not too out of fear of ruining.
As for torquing the bolts down, I stops wrenching when the bolt stopped moving not going beyond that point. Hope that was right.
Also When cleaning the mounting plate I used a razor-blade paint scrapper to get all the crude off wiping down with brake cleaner. Cleaned the housing with brake cleaner and blue shop towels.
|
Sorry I had all the pictures ready because I had done the procedure during Christmas holidays. Yeah, you did it right on the bolts. At least in the future you know that this DIY isn't such a big deal.