Quote:
Originally Posted by 808AWD325xi
If I recall correctly, the CAN arbitration ID for tester (diagnostic tool) on E90 K-CAN is 0x5FE.
|
Help. I ship 0x5FE 0x04 0x2C 0x10 0x00 0xAE 0x00 0x00 0x00
and 0x5FE 0x03 0x2C 0x00 0xAE 0x00 0x00 0x00 0x00. I don't get a response from the ecu.
0x04 and 0x03 message length;
0x2C - DynamicallyDefineDataIdentifier service (ISO 14229:2006) (enabled sniffer on the computer's usb port when testo is running);
0x10 - also sniffer usb;
0x00 0xAE - ID parametr charge air temperature.
I can only read the messages exchanged between the blocks of the car. If anyone needs, I can throw off my transcript of the messages.