Quote:
Originally Posted by krukedking
ok my story hoping someone can chime in.
i had a bunch of work done on my car, kittyless dp's, all new index 12 injectors(all coded) walnut blast, new plugs, new pre-cat o2's. all done at the same time.
so here is my issue, car ran great, no smoke or anything. i load up v6 93 tune with no intercooler. when i come to a stop but only sometimes, the car will puff out some smoke, I am going to order the rb pcv. well besides that the car does not hold boost very well. and i get codes
2c7e lambda probe behind catalytic converter trimming control
2c6a oxygen sensore after catalytic converter mixed up
2ded power management standby current control
30ff turbocharger, charge air presure too low
sometimes i get a vanos code but i forgot to write it down.
at high rpm is the only time this happens, i can sometimes clear the code via mhd, but sometimes have to shut the car off and it will clear.
im not sure where to start looking. any help is much appreciated!
http://datazap.me/u/krukedking/half-...og=0&data=4-23 |
heard mixed o2s will throw a bunch on codes 2c6a