Quote:
Originally Posted by ReinisO
Quote:
Originally Posted by sd*********
You FA write to CAS and NFRM, after that you need to factory code JBBF and CIC/CAPPL with SG_Codieren.
|
Hi!
You are so kind, thank you for your input.
What does the first part mean? "FA write to CAS and NFRM"?
And how can I factory code JBBF and CIC/CAPPL?
Thanks |
Ok so open up NCS Expert
F1
F3 choose CAS
F2 and add $494
F6 back
F4 process ecu and choose CAS
F2 change job and choose Fa_write
F3 execute job
F1 change ecu and choose NFRM
F3 execute job
Close out of ncs expert and open if back up again
F1
F3 choose CAS
F6 back
F4 process ecu and choose CIC/CAPPL (CIC for 09+, CAPPL for 06-08)
F3 Execute Job
F1 change ecu to JBBF
F3 execute job
Done. It's been a while since I've done this programming retrofit but I believe there may be a few lines you gotta change in JBBF but go ahead and do the above first and see if they work after.