Optimum Opti-Lens Headlight Coating -
an advanced, resin-based coating Opti-Lens is a hybrid coating based on Opti Coat. OPT added acrylic for flexibility due to the constant expanding and contracting and increased the UV absorbers content to accommodate the absence of protection inherit to polycarbonate.
This product is specifically designed to provide protection for headlights, taillights and other poly-carbonate surfaces
For use on new (OEM) or renovated headlight lenses; bonds directly to the polycarbonate finish due to its acrylic co-polymer resin content designed to bind with plastic and polycarbonate. Once applied to the headlight or other hard surfaces, the resin will form covalent bonds with the substrate and crosslink to form a permanent film. Opti-Lens coating contains high levels of UV blockers to prevent headlights from fading over time.
Apply directly to the headlight using a poly foam applicator or Optimum Dual Pro Applicator. Work a small amount of product over the lens using overlapping passes until it appears to melt into the lens and disappear. Remove any streaks or high spots with a soft microfiber towel. It takes approximately 30 minutes to cure before it can be exposed to water. Allow 24 hours to pass before washing or cleaning with pressure.
This product can only be removed via mechanical means (abrasive polishing) it does not wear off.
TOGWT® Autopia Detailing Wiki Article - “Headlight Restoration” - http://www.autopia.org/forum/autopia...ml#post1506615
TOGWT® Autopia Detailing Wiki Articles, these informational resources contain everything you’ll ever want to know about automotive detailing and are an invaluable addition to your detailing knowledge base -. http://www.autopia.org/forum/autopia...yperlinks.html