Quote:
Originally Posted by Alan@PYSpeed.com
move the switch on the blinker stock until it says CHECK CONTROL and then press BC
|
I say this genuinely so as not to be too much of an arrogant (donkey*), mainly because it is places like this I have done most of my research, but in case you don't understand what the above means:
on the turn signal shaft (left side of steering column) there is a scroll tab similar to a light switch you'd see in your house. Click this up and you will see many status checks and system diagnostics you can review (oil level, tire pressure, etc.). Once you see one you would like to review, press the tab on the end of that shaft to run the test and hopefully you will Id the solution.
And feel free to have a laugh at the repetitive usage of "shaft".