View Single Post
      09-13-2018, 01:02 PM   #4
Bfurrow95
New Member
0
Rep
9
Posts

Drives: 2011 BMW 335I E92 Coupe
Join Date: Sep 2018
Location: Tucson

iTrader: (0)

Quote:
Originally Posted by W37V View Post
Hello all,

Buddy's 335i (automatic) is having some issues and I am not quite sure what to tackle. Car is stock with 80k miles. No clue if the car was previously modified (he is 3rd owner).

We pulled the codes (by Carly) and got following:
002774 - Air mass plausibility; air mass too high
002c90 - diverter valve; pinched closed
002bc1 - mixture ECU; mixture too rich
0028A0 - throttle angle - absolute pressure suction, comparison pressure too high
002775 - Air mass plausibility: air mass too low

Car runs like crap. When first started (cold engine), car dies several times and idle is erratic. When driving, it is slow as snail. It feels like there is no boost whatsoever and it's running on engine alone.

We cleaned maf, but there was no change in behavior. Are there two mafs on this car? How can we have air mass too low and too high at the same time? Is turbo bad? Bad diverter valve? I didn't hear any hissing and visual inspection didn't reveal any broken hoses etc.

Before I get blasted for not searching, I have searched, and most of the treads were talking about how these codes are normal for tuned car and can be deleted.

Then again, maybe I overlooked something.

Any advice would be helpful.

Thanks!
Have the intake valves ever been cleaned? With it running rich you might have severely gunked up intake valves.
Appreciate 0