Quote:
Originally Posted by uhaulball
do we disconnect the #12 wire from the headlight adapter? or CUT it. you say to attach the end of the #12wire to the resistor wire, but then you say to also leave a few inches. i dont get it, that contradicts. the instructions could use a little editting, its confusing me. do you have an AIM screen name, and more pictures?
|
the resistor has two connections: to the ground wire (#2) and to wire #12 FROM the computer side, not the headlight side. The idea is to pretend the resistor is the bulb. The sidemarker power wire connects to the headlight part of wire #12 and the ground wire (#2). You have to cut wire #12 so the car no longer tries to power the bulb in the usual fashion. I will try and "draw" the wiring diagram and post it.
Also, when you order the LED urn signal kit, the instructions that come with it have pictures which will probably be helpful.