Quote:
Originally Posted by LMB335IS
Well, yes it's possible but you're probably not going to like what you need to go through to get it, especially with a E8x. You'll need to swap in a M3 GWS and shift boot/knob, drivelogic switch and repin the connectors along with the M3 flash of your choice. I use the M3 GTS flash. It's more difficult for you because at least all the console/shifter pieces are a direct swap on a E9x. You will need to fabricate a bit.
You'll also need to change the final drive ratio to something close to the M3 DCT's 3.15 to work with the software. I used the complete M3 drivetrain with a custom 2.81 gear from a 850i. They both use the 210mm diff so the R & P are interchangable.
|
This must be possible via flash only. I understand swapping all of the hardware makes is possible now, but I'm hoping it would be possible soon via flash only. Not sure if anyone is working this...