Quote:
Originally Posted by pilopilo
I've been trying with ProTool to make this work and it's not happening. Here's what I've done.
1) Unplug TPMS module (RDC) in the right trunk above battery (08 335xi)
2) Switch all of the disable TPMS codes in "Interior" menu
3) TPMS warning lights all go off.
4) Edit VO to remove the 2VB item and add 265 item. Save to CAS and FM
5) Go into interior menu and "load" the default VO in the Cluster (I have iDrive) so the iDrive will show FTM instead of TPM in the "Tire" menu (it doesn't...it keeps showing the TPM grayed out)
6) Go into Chassis and code the FTM code to "Active". Then load the code. Sometimes it's telling me an "error"
I've tried turning the ignition on/off at various steps and all sorts of the above combinations, but I can't get it to work. The TPM warning lights are all gone, but the FTM is not activated. What am I doing wrong?
|
I am at the same spot (ish) ;/
I am getting a constant
Status: FTM system error! error