|
As I recall the one or two that did doorboards here used two channels
for the 6.5's per side. One channel was shared by one underseat and one of the doorboard speakers. That would mean you would need three sets of wires
running into the doors.(for active)or two for semi active. Why don't you call Jehnert and see what they say.
That would mean you would need 2 ohm stable channels if wiring n parallel.
Didn't the doorboards come with some instructions.
This is going to depend on if you have a 2ohm stable amp .
Otherwise series parallel combinations that add up to 4 ohms per channel.
|