|
wtf does a ****** charge pipe+bov require you to leave a diverter valve in place,, let alone a vacuum hose on each side.. have had zero problems with the AA.. easy install, 1 vacuum line..
But on to the subject at hand.. metal shavings.. OUCHY! hope u figure out whats wrong and that it wasnt caused by a mod. But the issues you had with the BOV, if you hooked it up wrong theres a possibility that you were puttin some stress on the turbos..
Cause with my AA bov, the vacuum hose somehow got pinched with my shitty running, and it wouldnt release pressure under high boost.. And thats not a good thing.. that pressure has to go somewhere.
but good luck none the less and i hope u get the problem resolved
|