Quote:
Originally Posted by AlanAZ
Bentley recommends replacing the O-ring on the drain plug, which is not listed a separate part. I just replaced the entire plug, they are just a few dollars. Torque to 22in-lb.
Also, BMW warns not to subject the pump to straight coolant, it must be mixed with water outside the engine.
For service in Arizona, I went to 60/40 water/coolant with 1 bottle Redline water wetter.
|
Can you tell the
part # for the plug, I have spend like 30 minutes looking at diagrams on realoem.com with no luck. Will do this DIY on my Christmas break along with oil change