Quote:
Originally Posted by RenaissanceMan
Looks like the electric water pump was dead. I used my INPA software to read the error codes and attempt cycle the pump on directly from the program. Still no movement. Got 2 error codes that indicated no communication with pump and pump speed probs. I also checked the voltage at the pump and all was normal, so I'm assuming no blown fuse. Also disconnected, cleaned, and reconnected the connector to pump.
|
Sorry to hear this... my newly replaced Waterpump died with an 2E82 code about 200 miles after it replaced my functioning waterpump @104k miles just because I already had the subframe down and it was probably a good idea to get it done. Had to tow the car back to the Indy