Quote:
Originally Posted by Biginboca
N54 Manifold Swap Tutorial
I do this with 2 hose clamps and some “purchase by the foot” vacuum line from auto parts store. They keep it on a spool behind the counter so you have to ask for it. I used 3/4” vacuum tubing and a couple hose clamps. Just push the ends you are joining inside a maybe 6” section of vacuum line (they should fit snugly inside) and then use some hose clamps to seal it. This is the end result:
|
I would recommend changing vacuum tubing to fuel line / PCV. You probably will get oil sweating with just using regular vacuum line.