[makkan00]

Originally Posted by terminator2k2

im in need of help.....if any one can help......i got a cable and software on my computer but keep getting :

COAPI-2000, BIP-0001 error

ncs reads vin ok but unable to get fa...

ERROR! Modul: LFCDHDIA.CPP (A_E65CAS.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
COAPI-2000: EDIABAS or SGBD error
BIP-0001: OUT OF RANGE

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
FA_READ

>> ERROR! Modul: COAPI4.CPP, Proc: coapiReadAuftrag, LineNr: 04, ErrorNr: 2000
FA_READ: A_E65CAS

any one in the walsall area able to help.?

im trying to see what the dension enabler did to my car as i have:

all i ever get is the safety screen, when ever i select the Tv function on the idrive i always get " for your safety tv/video only when stationary "

this is even with the handbreak on and engine switched off.

i have a dension 500 gateway and avr module fitted and trying to get the video part working. i already have tv enabled...

see this post:

e90post.com/forums/showthread.php?p=12924235#post12924235

cheers

chris

Chris,
You can use the same kit (which you used previously) again to unlock this option.
There are three options:
1- Never block video
2- Block video in motion
3- Always block video

When you used that kit and tried multiple time, with each time it moved the option to next.
So if option 1 is ticked, and using that kit, it would move it to 2, and so on. After 3 it goes back to 1.

I think when you used that kit last time, you left the option to 'block the video all the time'.

You should try that kit again.
P.S: NCS error seems that you do not have few compatible files and Edibas error.