Quote:
Originally Posted by Fredrik_Sweden
I am glad I found this thread, I have had trouble with the ELV on my E91 -06 for about 1,5 years. I took it apart and lubricated all parts + tacking the electric motor apart and cleaned it for about 1 year ago.
2 weeks ago it started to show yellow light again after working perfectly for 1 year
So I decided to try the emulator after reading this thread. It works perfectly!
So I thought I could share some info about how I did it:
1. I have soldered the connection pins on the circuteboard.
2. No plastic casing for the curcitboard was included, so I made on in my CAD program and printed in my company’s 3D-printer
3. Connecting it to the car was super easy, about 20min job.
- Remove the kick panel, only 3 T20 screws.
- Put key into car and check that the ELV unlocks the steering wheel.
- Disconnect the battery in the trunk
- Disconnect the ELV-cable you can access it easy from the underside where you have removed the kick panel.
- Note that the ELV-cable connection-pins are marked 1 2 3 4. Number 1 pin must be connected to the number 1 pin on the curcitboard (it is marked).
- Connect the Emulator.
- Reconnect the car battery. And insert key. You will see a small LED on the curcitboard flash when the Emulator is working.
Best regards
Fredrik /Sweden
|
Visa har det bra☺️ Har samma problem, men kan inte få låstet att släppa
så vet inte vad jag ska göra,