Quote:
|
Originally Posted by avocet
hmmm. that bit the sway bar attaches to is not really that thick... I suspect there must be either a backing plate or perhaps some type of fastener used to anchor the studs.
do you have a small mirror and able to look behind that plate?
are you not driving you car in the meantime? I would think you could remove an endlink and drive around slowly for awhile.
hopefully someone here is going to do an oil change soon and can peek behind there with a small mirror!
|
I have been driving with the one missing connection the last few days... Slowly mostly around corners.
I'll try to use a mirror today. Really want to get this stupid thing resolved before another connection is stressed and snaps off :/