Quote:
Originally Posted by gunnerxq
Can you not press it down hard enough so both screws catch then tighten it using a screwdriver? Use some strength.
|
I used so much power that the OEM green oring delivered by BMW broke ...I had to buy a new one ..
Quote:
Originally Posted by 6ixSpd
You're supposed to use the foam gasket *and* the screws supplied by AFE. Did you use the correct screws? The stock ones will not be long enough.
In the screenshot you posted above, it looks like the two screws to the left are what you need. Theyre longer.
|
the screws on the left are the original BMW bolts. They do not match the new intake tube ... black screws are those that provide AFE and that's what I should use them, unfortunately, as you can see, they are too short. I still do not know if the MAF should go inside the intake tube together with the green O-ring...