Quote:
Originally Posted by Tzu
ANYWAY back on topic. You are using 6 x 0.5mm nozzles which should be about 1200 mL/min (optimistically) and you were running 4 x 1.0mm nozzles previously which is about 1800 mL/min. Are you going to run a single 1.2mm nozzle upstream to account for the difference? Your trims are okay, but I'd personally want them closer to zero on a single turbo setup.
|
4X 1mm nozzles do not spray 1800cc. When i tested it i was seeing results of 12-1300c. The FAV is only capable of flowing 1500. 6x .5mm is actually only about 166cc away from 4x 1mm. Thats through real life testing not theoritical. Procede is logging about the same also.