View Single Post
      06-27-2012, 10:56 PM   #86
BES335xi's Avatar

Drives: FBO+ N54xi
Join Date: Mar 2008
Location: Queens, NYC

iTrader: (4)

Garage List
03/07 E90 335xi  [0.50]
Originally Posted by Humtek View Post
I changed mine a couple of weeks ago. Simple task, took me about 2hrs from start to finish. If you have an after market exhaust you will need to remove one of the center sections to remove the transfer case support. It was actually a lot easier than what the DIY guy makes it seem. The support bolt slid right out compared to his experience of hitting it with a hammer....
Thank's for the info, Did you have to Code your car after you changed the Servo Motor or did it adapt by itself, i read somewhere that you have to finish up the install with a gt1 or something similar...

And...Did you use a lift or just on normal jack's?
JB4+usb | P3 Vent Boost Gauge v2 | BMS OCC | BMS DCI | AMS FMIC | AR xi CL DP's | BT Tool | Edibias/NCSExpert/INPA BMW Coding | Cyba Quad Exhaust tips | M-Tech Rear & M3 Front Bumper | Red Cyba Air Scoops | Blacklines | Vinyl Overlays | ACS Roof Spoiler | Matte Black Grilles | LED Side Mirrors | Rear Euro Fogs | etc..