Quote:
Originally Posted by *********
Try leaving your hazards on when you connect to INPA.
|
Tried that last night, no change. I looked in the section in INPA where you can monitor all the sensors in realtime and the values of the two things that keep throwing codes at every startup were well within spec so it's like the problem is happening immediately when I start the car. If I clear the codes with the engine running, the reduce power message goes away and does not return until the next time I shut the car off and restart it. If you look at the second error in the screenshot I uploaded above it looks like the code was triggered when the engine was only at 96 RPM, which would have to be during ignition. Also there's definitely a change in the engine sound when it is in reduced power mode. The exhaust resonates inside the car more, even at idle.