Quote:
Originally Posted by Ripechicken
Hello guys,
I recently used INPA on my E92 325D M SPORT and reset the CAS counter to fix the steering lock error.
It fixed the error but now my car turns over but won't start. The error I get is 4a63 - EWS tampering protection.
I'm assuming it's because the DME/CAS is out of sync now and I know it can be done in INPA, however, I get the error when selecting my engine (M57TU2) in INPA.
Requested control unit not found D62M57D0,D60M57B0
Control unit found, D62M57A0.
Any help would be great thanks.
|
You have a DDE not DME. From an old thread:
Quote:
Originally Posted by makkan00
As you told me that error is 4A63....
Solution:
Re-align the DDE and EWS
How you do it?
1- Launch inpa
2- Select the engine
3- Choose the model of the engine (in your case
DDE6 = 318d, 320d, 325d, 330d, 335d ( 03/2005 - 09/2007 )
DDE7 = 318d, 320d, 325d, 330d, 335d ( 09/2007 - )
4- Select option: activate (usually F5 but check in your inpa)
5- Select option: EWS
6- Select option: reset ----> in progress ----> click ok
7- Bak to the main menu, ie, back, back, back, and close the INPA
8- Open the inpa and check the errors. That errors should have gone by now.
9- Turn the ignition off, remove the obd connector and start your car.
Please share the results.
|
If you still don't have the engine in INPA. Reinstall with a good copy from the bimmergeeks website.