Originally Posted by Aragorn30d

Theres a write up on one of the forums, might be on here, i cant remember.

You need the EGR delete pipe for the throttle body part, you need two 18mm pipe caps to blank off the coolant feed/return, and you need a blanking plate for the exhaust manifold, which i believe is on ebay:

http://www.ebay.co.uk/itm/53-8-mm-EG...item2a31511cc9

Once you've got that lot, you can completely remove the EGR cooler.

I would definately remove it all, you dont want all that manky exhaust gas clarting up the inlet manifold, it makes quite a mess in there.