I think I'm going to look in the Carly app so I can do some logging. In the meantime though I managed to setup the bimmer software and pulled the codes. Here's what I got:
Error Codes Present On Saturday, July 25, 2015 11:36:47 AM
Code,Type,Description
DME,DME Number: 07611397
29D2,2,Combustion misfires, cylinder 6
2A17,4,DMTL, system fault
30FE,8,Unknown
3100,8,Unknown
30FF,8,Unknown
29E1,8,Mixture control 2
Once I reset the codes and scanned again, no codes.
Does anyone know a good local shop that could diagnose a track related limp mode issue? It only seems to happen when at the track or when the car is being driven hard for extended periods of time. I've only had it for about a year but I'm thinking I need a place that can pull the old service records to see what all has been changed within the last 5 years. I'm wondering if coils / plugs / hpfp / injectors were ever replaced. I know turbos were replaced at 75k. I know Sharpe BMW would probably be my best bet but that's going to be costly. Can Indy shops pulls old service information or is that BMW dealer specific?
|