[cstmx_ryder]

It's very hard to diagnose the problem from a picture, if anything, you need to take a picture of the upper strut assembly of the front struts, ie the spring and the top hat assembly........

Worse case scenario, you'll have to take the front struts apart and reassemble them and see if the problem goes away. I know, it's a PITA.......

Also, check to see if there's one or two washers in the top hat assembly, where it meets the actual piston of the shocks. The washer is a conical washer, and there should only be one.....

Here's a picture of what it SHOULDN'T be, there should only be ONE washer: