Quote:
Originally Posted by Montegoo_NYC
actually as i said in my post, the ONLY speakers to work are the passenger side, so you proved yourself right, an entire side did stop working. If you stand behind what you do, you wouldn't use a shitty splice job, i have had forum members who read this post already contact me about custom made cables that run from the MULF2 to the AUX socket, so if you were so "professional" you would have just installed that instead of some unevenly wrapped electrical tape and bad wiring.
|
I built a custom AUX cable when I did my CIC/Combox retrofit. All you need is the crimp-on pins and any 3 wire cable. Pin one side and insert into the connector on the USB/Aux port and pin the other side and insert into the MULF/Combox harness.
It's maybe ~10-15 in parts (if you buy the BMW pin connectors, you can probably get them much cheaper through a generic electronics supply house).