Quote:
Originally Posted by AndreL
Can anyone guide me to were is it that I need to look in order to do this. I can't seem to find it nor know how to
|
All of it is done in the "Safety" section
The CAS and Footwell module sub-section.
https://www.bimmergeeksprotool.com/diy
From their site:
Coding "How-To's"
Delete TPMS Light:
1. Unplug the RDC module. In pre-LCI models it is located behind the carpet and padding on the right side of the trunk. It is a white box that has RDC labeled on it. On LCI models, it is located in the rear passenger wheel well,
2. Code the 3 parameters containing "TPMS Delete" in the coding section of the instrument cluster to "Not Active".
Folding Mirrors:
1. Set "Comfort Closing via FOB" in the coding section of CAS to "Active".
2. Set "Folding Mirrors via FOB" in the coding section of FRM to "Active".
(optional) Set the "Comfort Closing Delay" in the coding section of CAS to 0ms to make mirrors fold quicker.
Delete SOS Light: Note, this light appears for many reason, this normally kills the error..
1. Set the 2 parameters containing "TCM Installed" in the coding section of the instrument cluster to "Not Active".
Video In Motion (CIC only):
1. Code the 3 video in motion parameters in the Idrive coding section.