Quote:
Originally Posted by stevesingo
OK, going back to what socalcoding stated that FRM_87 is FRM1, I decided to double check the part number:
[IMG] https://forum.s14power.com/data/phot...f1d0d342c0.jpg[/IMG]
It appears to be correct as per the ETK.
Following the iddots guide, when selecting F2-Update ECU, I don't see FRM1, only FRM2, FRMPL2 and FRMR3.
[IMG] https://forum.s14power.com/data/phot...608d2b116e.jpg[/IMG]
If I use F2-Choose ZUFB I find my FRM part no under FRMPL2.
[IMG] https://forum.s14power.com/data/phot...780a98d9c7.jpg[/IMG]
So I hit I OK, enter the VIN (F4) and Done (F8). Then hit F3 prog zb update.
It goes through the motions and I get..
[IMG] https://forum.s14power.com/data/phot...bffa6b3475.jpg[/IMG]
Am I correct in stating that this is OK? I still have no power windows, welcome lights, interior lights, parking sensors etc. All of which I believe are dependant on the FRM. |
Frmpl2 is frm1 or frmfa. You're not following my steps above though, you go into comfort mode, press f3 to update ecu, choose frmpl2, press f4 input vin, press f8 done, then f3 prog zb update. Why are you manually choosing a ZB number? Do the exact steps above. After it flashed you'll need to go to ncs expert to copy VO from CAS over to FRM. Then default code frm module