I just done the motor replacement and searching how to erase 2e0f
Motor replaced but no need to replace the eccentric shaft, just need to remove the shaft stopper then turn to highest position would move the motor out.
And I reaplace both cam sensors, will see any improvement.
Quote:
Originally Posted by precisionintime
Hey guys -
I'm having similar problems now. Car had rough idle for about a week then one day it cranks but won't start. Threw up 'drivetrain malfunction' and check engine light. Had it towed to a dealership.
Vanos bolt recall was done about a year ago.
SA identified that the issue now is the actuator and parts around it. Highly recommends that I replace the eccentric shaft as well since it's bolted on to the actuator. 7/70 warranty covers everything except the shaft.
I have an 2011 X3, 35i, 20k miles, 1st owner.
|