Quote:
Originally Posted by FaxData
To turn off manipulation, go to Datei menu -> Profil editieren -> FSW/PSW, and uncheck "FSW-/PSW-Manipulate with FSW_PSW.MAN"
See the screenshot below.
Also, to my knowledge you cannot code the TCU or the MULF2 without an ICOM. But you shouldn't need to if you aren't replacing your TCU/MULF2; I did not do SG_RESET when I did a CIC retrofit. Coding the CIC with manipulation off was enough.
|
Do you know what is causing the error above