|
Try:
- amp gains at minimum
- skip input setup
- no sub
- front 2-way (30Hz subsonic at 24dB, 120Hz Hi/Lo at 6dB)
- rear 1-way (100Hz at 24dB)
- center 1-way (150Hz at 24dB)
- calibration volume -45dB
Set MS-8 volume after calibration to -6dB. Adjust amp gains to desired level, you might find that the woofers are low on impact. Adjust the 31-band EQ to taste. Use your OEM volume normally.
Play around with the front Hi/Lo point/slope, calibration volume and amp gains for different results.
|