Quote:
Originally Posted by hl0m4n
when i unscrewed the white adapter you can clearly see there is a bunch of oil on the thread and it is a complete mess in there. the other adapter however was pretty much clean. i guess one hose is for the oil and other is for clean ?
|
Looks like mine. I added RTV to the threads, but the o-ring is a very good idea. One of them is cleaner then the other and should be as the clean one goes back to the intake.
Quote:
Originally Posted by cstmx_ryder
What does the rubber washer do? I see the diagram you drew, but it doesn't make sense to me how the green color represents the washer. Shouldn't the washer be sitting flat in the white adaptor like you've shown on the previous picture?
TIA
|
I think his drawing is just shitty. lol The o-ring acts as a seal between the two white fittings to help prevent oil getting on the threads then further leaking out of the connectors. I would add some silicone on the threads to prevent any oil that does get by the o-ring to not leak out of the connectors through the threads.
EDIT: looking at the pic again, the flow is wrong. OCC is south.