Quote:
Originally Posted by snoozee
from first pic, i can see you have the mic wiring. it's the thick black wire which has clear heat shrink.
from 2nd pic, i can see you are missing the antenna cable.
3rd pic just confirms that you have a mulf2 high.
you still need to search your driver side foot well to see if you do have the other side of the antenna cable. if you manage to find it and have a multimeter, you could short the connectors of the antenna cable on the footwell side and check the bunch of cables you found in the trunk to confirm. if the color code of the connector is the same as one of those in the trunk, then i guess it should be the same cable.
search the fzd to see if you have any existing mic, if you do not, then you need to order the mic and bt antenna, install hardware, code and test. whether you need to swap mic wires behind the glove box will depend on the test calls you make and whether the other party can hear you.
that's all there is to do.
|
thank you for the response, isn't the antenna cable the white with purpel cap on far left? it looks the same as the OP's install photo