|
Awesome thread guys! I was hopping someone could help me out though. I just swapped out my basic seats ( no heat or power) for a pair of m-sport heated (bolsters but no power movement) I ran power for the bolsters and heat, both lines to the junction box (pins 34 and 38) as well as grounds and switched on pin 5. All connections are run to the original positions in the proper plugs. Bolsters work but I get no lights on the het switches and no heat. Anyone have an idea? I did not run an additional k can for either seat and if I read correctly I only need the drivers side anyways.
Coding was done with my icom with Ista p and was successful.
__________________
2009 118i Monaco Blue "Maximillion"
2009 335i Saphire Black M Sport "Leopold" Cobb stage 2 aggressive tune, Mishimoto FMIC, Cobb charge pipe, Cobb catted down pipes, Forge diverter valves, BMS inlets and DCI, Cyba scoops and M Individual Audio retrofit and M3 gauge cluster retrofit.
2011 328i Titan Silver M Sport "Franzel" <--Wife's car
|