Hey guys,
I just wanted to confirm something.
My car is E92 12.2006 Europe version with standard music (no tweeters) and CC professional navigation.
I just upgraded my speakers with Match ones -> front doors
https://www.audiotec-fischer.de/en/m...s/ms-42c-bmw.1 (added twitters as well + crossovers)
Rear doors ->
https://www.audiotec-fischer.de/en/m...rs/ms-4x-bmw.1
Subwoofers (actually still waiting on them but should be on the car soon) ->
https://www.audiotec-fischer.de/en/m...kers/mw-8bmw-d
And their amplifier for that setup ->
https://www.audiotec-fischer.de/en/m...lifiers/m-5dsp
Sound is already improved but from what I get as a info for the car audio shop (and from the forum here) its not the best and get a lot of distortion on higher sound levels due to the head unit. I guess I need to re-code it to HiFi in order to fix this.
So my question is will this affect my rear speakers? What about the sound of my park distance sensors?
And is this all I need to re-code it:
Quote:
Plug in cable to OBD port and selected usb port
Run NCSexpert
Click "file" and select "load profile" and select "expertmode"
Click "VIN/ZCS/FA
Click "ZCS/FA f. ECU
Select chassis type "e89"
On choose ECU select "CAS"
After your vin is shown select "enter FA"
Select chassis type "e89"
Ensure VIN shown is correct and select "OK"
Enter $676 and then select "add"
Then scroll down and select "£676" and select "OK" (this step is to ensure the vehicle option (VO) has correctly been applied.)
Then select "Back button"
Then select "F4 Process ECU"
Then select from drop down list "CAS"
Then select "F2 Change Job"
Then select "FA_WRITE" and click "OK"
Ensure CAS is shown on "Get Coded" and FA_WRITE shown on "JOB NAME"
Select "F3 Execute Job"
The procedure need to be apply on both CAS and FRM modules !
Once done, don't forget to "SG_CODIEREN" on the modules
CHOST
CAPPL
CGATE
CAUDI
CTUNE
You need to wait yhe car to go into sleep mode before settings to take effect.
|
I also recently upgraded my mulf module to mulf 2 high in order to have USB stick support. This will be unaffected, right?
Sorry for bringing old topic but did not manage to find full step by step guide
UPDATE:
I actually went impatient
and we did the coding with a friend of mine. Its working on hi-fi now (at least as far as my ears and speakers can say - not sure if visually we can check that other than reading it with ncsexpert???).
What I may suggest to the guys who are about to do that is to make backups! If you just add £676 to the VO it will mess other options as well which you probably will want to revert back (e.g. it totally disabled my bluetooth phone).
The rear parktronic sensors sounds not that bad (quieter than the front ones but I can live with that).
The main issue now (I have added Mulf 2 High a week ago like I said previously but even before that my car originally had bluetooth phone) is my
volume during calls is quiet and I can increase it up to some point which for me is not loud enough especially if you drive on a highway.
What coding can we do in order to increase the volume during calls and eventually on the rear parktronic sensors? Thanks in advance and for the previous info as well
