Quote:
Originally Posted by ska325xi
i got your pm...so 1st set of wires is from the paddle shifters to the multi-function connector remember to ground/earth #2 pin of the paddle shift
(the multi-function connector connects to the steering column/slip ring.)
then 2nd set of wires is from the back of the steering column/slip ring..there's a connector, this then connects/tabs to the auto-shift wires
everything is shown above, read it a few times and you should understand it
|
I have the locations of everything down fine. What I need is to know which wire goes in which hole in the connector.
Like slot 1 in the paddle shifters, does that go in the slot in the multi switch connector on the bottom or the one near the middle? What about the wire for slot 3?
Also the wires coming from the slip ring connector, which wire should go to which wire (what color) from the blue connectors?
I don't think its listed but if I missed it my bad. Let me know when you get a chance.