Quote:
Originally Posted by jgoens
That looks like a great kit to start with. I have spent that much on my supplies. Read my thread "working on swirlies" and you will find all kinds of good info for noobs like us. I ended up going to M105 and it works the best. I am still in the process--I have achieved more than 80% swirl reduction and have BSM. I have found with limited Micro-towels and pads you really can only do a little bit at a time..unless you have a wash and dry system for them.
|
Yea, I've been reading that one recently as well and there's tons of info. I'd like to try to get it right the first time
.
What pads did you use with the M105?
Also, did you do another combination of polish and pad after making passes with the M105? I saw that it looks like just with M105 and cutting pad you can get a dull finish if you don't finish with a finer polish afterwards.
Also, I think my swirls are probably similar to yours. Enough to be quite annoying but not as bad as that X5 that DI posted in your working on swirlies thread.