Quote:
Originally Posted by bsmoov
The hose I provided is the hose you need.
There are people who used the 2 outlet "Y" shaped hose and plugged off one of the outlets just to reuse the hose, but you already have the correct hose. Plug that hose to the valve cover and the other end to the intake manifold.
As far as plugs, there should be 6 plugs total.
2 for the DISAS
4 for the harness on the bottom side of the manifold
Let's wait and see what other members have to say about it and where the plugs go. When I removed my manifold to replace with new DISAs I marked each plug with tape to know exactly where each plug goes (for the 4 plugs on the bottom). The large and small DISAs are self explanatory.
|
The manifolds are the same except for the number of ports for the CCV.