it will regen,,but you have to keep clearing the fault codes with a device during regen,,read this from an old post on another forum...C110 will force a regen if you clear the 480a /480a1 error
you can have all the glow plugs out it will still regen.
Plug in c110 scanner go for drive and keep deleting the codes as they appear while driving. After few times the errors won't come back and you will see the temp before or after cat (one of the two) rise and stay at 600c for about 10-15mins That is a regen complete,,the c110 scanner is just put in as a guide,,you will probably need inpa/foxwell scanner or equivelent
Last edited by rasa bmw; 12-13-2018 at 02:22 AM..
|