View Single Post
      08-21-2018, 02:20 PM   #2
chuckn0rr1s
Private
chuckn0rr1s's Avatar
No_Country
8
Rep
95
Posts

Drives: BMW 2011 335d
Join Date: Jun 2016
Location: Salt Lake City, UT

iTrader: (0)

Quote:
Originally Posted by SnapCoupe View Post
After installing everything, I tried to pop out the locating pins as everyone typically suggests but I was unable to get them out. Is this something you have to do with the front struts pulled out? Either way, I did the alignment with the pins in and this is what I ended up with.
Did you adjust the camber before popping out the pins? if So then its no longer aligned with the strut and they won't come out.

If you didn't adjust before trying to pop the pins out you "should" be able to pop them out with a steel punch.

Also are you trying to adjust camber on concrete or without an alignment rack? if so adjusting components is much harder to fine tune without having some sort of buffer between the bottom of the wheel and "floor" I would try using a piece of plywood and some salt or sand between the plywood and the floor. That will help fine tune your adjustments.

One more thing: Try rotating the camber bolt completely and see how the measurement changes.
Appreciate 1