Sorry for the thread bump but have a question about 2011 n55 335i xdrive.
Does the coding value parameter correspond to the N54 xdrive or E84 N55?
Reason being is that I have multiples on my trw trace file and not really sure which one to modify. I'm trying to learn how to code so an explanation would be much appreciated.
example:
Dynamic Performance Control (FDB)
N55 X1 Parameter: e84_FDB
N54 335i xDrive Parameter: FDB
To disable, set to "nicht_aktiv."
My TRC file
E84_FDB
nicht_aktiv
FDB
aktiv
Electronic Differential (AX_Ref_Diff_Lock)
N55 X1 Parameter: e84_AX_Ref_Diff_Lock
N54 335i xDrive Parameter: AX_Ref
To disable, set to "nicht_aktiv."
My TRC file
AX_REF
aktiv
AX_REF_DIFF_LOCK
aktiv
Maximum Brake Support (HVV)
N55 X1 Parameter: e84_HVV
N54 335i xDrive Parameter: HVV
To disable, set to "nicht_aktiv."
My TRC file
E84_HVV
aktiv
HVV
aktiv
Brake Standby (EVB)
N55 X1 Parameter: e84_EVB
N54 335i xDrive Parameter: EVB
To disable, set to "nicht_aktiv."
My TRC file
EVB
aktiv
E84_EVB
aktiv
Engine Power Reduction to Prevent Brake Disc Overheating (FLR)
N55 X1 Parameter: e84_FLR
N54 335i xDrive Parameter: FLR_C0F
To disable, set to "nicht_aktiv."
My TRC file
FLR
wert_00
FLR_COF
aktiv
E84_FLR
aktiv
Brake Fading Compensation (HPS)
N55 X1 Parameter: e84_HPS
N54 335i xDrive Parameter: HPS
To disable, set to "nicht_aktiv."
My TRC file
HPS
aktiv
E89_HPS
nicht_aktiv
E84_HPS
aktiv
Hydraulic Brake Assist (HBA)
N55 X1 Parameter: e84_HBA
N54 335i xDrive Parameter: HBA_DXC_8
To disable, set to "nicht_aktiv."
My TRC file
E84_HBA
wert_03
HBA_DXC_8
wert_03
|