I'd like to add the process I took in order to flash the FRM.
Clicked Device
Select Type MCU/MPU
Select Subtype FREESCALE 9S12XE
Select Device MC9S12XEQ384_D-FLASH
Then hit OKAY button
Then hit READ
Partition ERROR POPS UP hit OKAY
SAVE FILE
Went to website
http://tlvps.tomvanleeuwen.nl/frm/
Got these result
Conversion complete.
Logfile:
INFO:root:
VIN: WBAZW41050L826656
FA: E70_#0411&LUSW%0300*ZW41$169$255$2DE$316$386$3AH$3 AW$423$428$430$431$441$459$493$4AB$508$521$522$524 $534$548$563$575$602$644$676$699$6FF$6FL$6VC$818$8 25$845$853$861$880$8KK$8TL$8TN$925-A090-EWS4
Production date: 21.07.2011
Programming date: ff.ff.ffff
HW-NR: 9206233 (Hardware part number)
SW-NR: ffffffffffff (Updated part number)
ZB-NR: ffffffffffff (Original part number)
S: 9249074 (Original part number)
Before downloading, ensure that the VIN is correct.
Proceeded to download the EEPRPOM IMAGE
Went back to Xprog
Clicked Device
CHANGED MC9S12XEQ384_D-FLASH and SELECTED MC9S12XEQ384_EEE
Then hit OKAY button
CLICK ERASE
CHANGED 0 to 16
Once finished I went to FILE OPEN and OPENED the EEPROM IMAGE I downloaded
Once opened I selected WRITE
Once finished I went back to Device and changed MC9S12XEQ384_EEE back to MC9S12XEQ384_D-FLASH
Hit OK
Chose READ
D-flash read 0 bytes after the EEE was written which the site that converted my file said would be normal
I figure I would not have to code by vin with the above process, but it seemed I must have something wrong as my mirrors and switches are controlling opposite sides.
Is my only choice is to get a file from the first page, and buy a cable in order to program my Vin?
Also I was wondering if the FRM programming has anything to do with the Center Console Error Braking and Driving Stabilization Failure Error message. I'm not sure if this was already present before the FRM failed. I am not sure if this is an issue to be included with the mirrors and power windows controllers being opposite.
If I need to use a file from the link on the first page which I can't access, I'm not authorized this is the details on the FRM if someone can provide me a file and some suggestions. Thank you.
FRM3R E70 AHL 9249074-02 S.6135 H.W 08 SW 14.30.00
I have included my original EEE file which was converted using the website if that is helpful.