Quote:
Originally Posted by Expert@ApexRaceParts
Quote:
Originally Posted by Aaronxavier1
Hi all I'm new to the forums so I'm sorry if I'm beating a dead horse with the fitment question. I just recently got a 2008 e92 328i and I want to get some ESR sr04 wheels. I would like to know what's a good size and offset for my car without rubbing or rolling my fenders. Thanks in advance!
|
Aaron,
Welcome to the forums! Fitment can be tricky but we would be more than happy to offer some guidance here. Keep in mind that offsets can vary so feel free to use these recommendations as a guideline.
To start off, if you are looking for a staggered setup, we would recommend the following as a direct fitment without spacers or camber required:
Front: 18x8.5" ET35 or ET38 with 235/40-18 tires
Rear: 18x9.5" ET35 with 265/35-18 tires - Direct fit.
- Popular fitment
- 245/40-18 front tires can be used.
- 275/35-18 rear tires may require rolled fenders and/or negative camber depending on ride height.
If you are looking for a square fitment we would recommend the following fitment:
Front & Rear: 18x8.5" ET35 or ET38 with 235/40-18 tires - Direct fit
- Popular fitment
- OEM 225/40-18 tires can also be used.
- 245/40-18 tires can also be used, but 5mm front spacers may be required with certain aftermarket suspensions.
I hope this was helpful information. If you have any other questions, feel free to ask.
Thanks!
- Max |
This helped a lot thanks a lot! I'll post pictures of when I get them put on!