Quote:
Originally Posted by apexit4
Quote:
Originally Posted by mweisdorfer
Got 98% of the scratches out of the hood.
I first wet sanded with 3000 & 5000 grit. I then got my porter & cable D/A polisher & chemical guys Hex Logic pads out. I used a heavy cutting compound made by Sonex. It's worth the extra $10.00... trust me on that! I followed up with 3M's no 2 & 3 perfect it.
I'm very happy with the results
|
Every time I see results like this I'm tempted to give the process a try but the fear of messing up the paint holds me back every time.
|
I can guide you through the process.
First step is getting a quality D/A polisher & pads.
It's hard to go wrong with a Porter & Cable 7424xp
PORTER-CABLE Variable Speed Polisher, 6-Inch (7424XP)
https://www.amazon.com/dp/B002654I46..._MCW2EbVENFE9V
I like the chemical guys pads; they are price friendly & produce great results IMO.
You only need orange, white & black. Maybe red & yellow
Yellow - heavy cutting
Orange - heavy / medium cutting
White - medium / light cutting
Black - light cutting / polish
Red - wax & sealants
Chemical Guys HEX_3KIT_5 5.5" Buffing Pad Sampler Kit, 4 Items - (1) 16 oz Polishing Pad Cleaner + (3) 5.5" Buffing Pads that Work with 5" Backing Plates
https://www.amazon.com/dp/B01J588UNG..._aJW2EbSBBXS6Z
Lake Country Backing Plate -
3" & 5"
Lake Country - Dual-Action Hook & Loop Fastener Flexible Backing Plate - 3 Inch Diameter
https://www.amazon.com/dp/B006LPNEJC..._MKW2EbSHH9AME
Lake Country - Dual-Action Hook & Loop Flexible Backing Plate - 5 Inch Diameter
https://www.amazon.com/dp/B0008G1RDK..._.LW2EbRY49PKC
Your gonna need 3000 & 5000 sand paper for surface scratches that the D/A won't get out.
3M Trizact Performance Sandpaper, 03064, 3-2/3 in x 9 in, 3000 grit, 5 per pack
https://www.amazon.com/dp/B005RNGL9O..._DTW2EbEXY2XY4
3M Trizact Performance Sandpaper, 03056, 5000, 3 2/3 in x 9 in
https://www.amazon.com/dp/B00LIXEWXO..._yUW2EbH85J77Y
Last is the polish -
Sonex might make one of the very best cutting pastes -
Sonax CutMax, Cut & Finish, Perfect Finish Kit
https://www.amazon.com/dp/B07LBW536K..._cWW2EbPQN91G6
3M Perfect It 1-2-3, Also makes a very good product.
1Pk - 3M - Perfect It Buffing & Polishing Compound 06085 06064 06068
https://www.amazon.com/dp/B0082LK8K6..._1YW2Eb6MPK0DF
They do make the same kit in a pint size for about $75.00.
I used the Sonex Heavy cutting & then 3M 2 & 3.
I like the Sonex heavy cutting better than 3M's version.
Then you will need to watch a few videos on you tube
Like this -
Or