Quote:
Originally Posted by freedomfries
Mileage? How did you measure your camber and toe? Did you check for any play with the control arms and tie rods?
|
106K miles, I measured camber with a digital angle finder. Toe by measuring distance from the front center of left tire to front center of the right tire, then again on the back of the tire. Both end up being the exact same measurement, figured tires are facing forward if that is the case. Caster I measured using the trig method: caster (deg) = (180 / 3.1415) * [(camber1 - camber2) / (turnangle1 - turnangle2)], that too was within spec. I think.
Best bet is probably going to an actual alignment place and getting it checked. Not sure how accurate my back yard mechanics measuring methods are.