BMW 3-Series (E90 E92) Forum - View Single Post - DIY: N54 Hydraulic Lifter (and Cam Bearing Ledge) replacement

AndyW · 03-16-2017, 10:38 PM

Great DIY...I think my car is starting to make a similar sound but only right after a cold start...then it goes away. Figure I should start sourcing tools and parts. WRT the timig tool set...is there one you recommend? I found an EWK set on Amazon for ~$200 and a KTC with an included tensioner tool for ~$400. Any idea if the KTC is really worth the extra coin? Thx.

03-16-2017, 10:38 PM	#30
AndyW Supreme Galactic Commander (one galaxy over...) 672 Rep 1,778 Posts Drives: '08 E93, '12 E82, '13 E93 M3 Join Date: Feb 2012 Location: Washington, USA iTrader: (5)	Great DIY...I think my car is starting to make a similar sound but only right after a cold start...then it goes away. Figure I should start sourcing tools and parts. WRT the timig tool set...is there one you recommend? I found an EWK set on Amazon for ~$200 and a KTC with an included tensioner tool for ~$400. Any idea if the KTC is really worth the extra coin? Thx. __________________ Best, Andy '12 E82-PS2,Stoptechs,Clubsports+M3 bits,Accusump,Wagner DP+EVO III FMIC,ERCP,BMS Intake,Mason Strut Bar,Wedge Tune
	Appreciate 0 Quote